The
SBLive.zip archive contains
the DOS sound card drivers for the Sound Blaster Live! and Sound
Blaster Audigy PCI cards. They are setup and optimized for AdvanceMENU
and MAME, but they will not work with ArcadeOS on most platforms
(especially intel's). This driver does not support Audigy II
models. Note, the Audigy is the last PCI sound card from Creative
Labs to fully support DOS.
The SBPCI.zip archive contains
the DOS sound card drivers for all Sound Blaster PCI cards
(excluding SBLive! and Audigy models). They are setup and
optimized for ArcadeOS, AdvanceMENU, and MAME, but they should
work well with any legacy DOS game.
SBPCI.zip supports the following Sound Blaster PCI cards
_____________________________________________
SB Audio PCI 128
Creative AudioPCI
Sound Blaster 16 PCI
Sound Blaster PCI128
Sound Blaster 4.1
Sound Blaster AudioPCI
Creative Ensoniq AudioPCI
Creative Vibra 128
The EAPCI.zip archive contains
the original DOS sound card drivers for Ensoniq's 1371 and
1373 chipsets. They are setup and optimized for ArcadeOS,
AdvanceMENU, and MAME, but they should work well with any
legacy dos game.
The SBPCI64.zip archive contains
the original DOS sound card drivers for Ensoniq's 1370 chipset.
They are setup and optimized for ArcadeOS, AdvanceMENU, and
MAME, but they should work well with any legacy dos game.
Important Notes:
1. Your sound blaster PCI card can not use IRQ 5. IRQ 5 is
required by the legacy device.
2. Your sound blaster PCI card should not use the same IRQ
as your video card.
3. You must first uninstall your current Sound Blaster DOS
drivers in windows for my drivers to work (Start/Settings/Control
Panel/Add Remove Programs/Your Sound Card).
4. You can customize the IRQ and DMA settings using the sbeset
utility on all Live! and Audigy models. For help with the
sbeset.exe command line parameters, in dos mode at the command
prompt enter: sbeset.exe -?
Click here for more help.
